203/205 doubler

[loose cannon]

I am building my own doubler i can do all of it but cutting down the shaft. how knows where i can send it off and get it cut down and resplined thanks

 

[rockmafia]

http://www.jedsmachining.com/ I'd recomend getting a new billtet shaft, not much more than having a stock one replined.

 

[GubNi]

If you do it you should consider selling them.

 

[upnover]

If you do it you should consider selling them.

Curious as to what that means?

 

[GubNi]

The cheapest 203-205 kit is $500. I'm guessing that it requires less than $100 of material. I think the kit could be sold much cheaper and allow for a good profit.

 

[upnover]

ahhhh gotcha

 

[redneckjeep87]

hell if you could do it reasonably id pick one up off of ya if it works....been wantin a doubler in the fullsize since i got it and just havnt wanted to save up that much money

 

[loose cannon]

The cheapest 203-205 kit is $500. I'm guessing that it requires less than $100 of material. I think the kit could be sold much cheaper and allow for a good profit.

your right the adapter can be built for 100$ or less but the shafts is what takes the kits to 450$ and up if i can buy them in bulk for a cheaper price i could sell a kit for 300$ give or take a dollar or two ??? If there was enought interest i might do that but I want buy a bunch of shafts I don't need or can't sell.

 

[GubNi]

If you build it they will come.

I'm a vendor and would be willing to buy several at $300 each.

 

[jayvegas]

try this!....

http://www.sumnermachine.com/sumner_products.html

he sells billet 203 shafts for $225!! not to bad!!...hope this might help??

 

[GubNi]

try this!....
http://www.sumnermachine.com/sumner_products.html
he sells billet 203 shafts for $225!! not to bad!!...hope this might help??

I bet he'd give a discount if several were bought. I sent him an email.

 

[jayvegas]

sweet! sounds good! yea Johns a good guy, i have spoken with him alot. and does real nice work too!

 

[loose cannon]

thanks I'll look into that.