22re info

[4.0 fury]

possibly buying an 89 toyota, 22re 5 spd,4wd...blown engine...what years would be the easiest direct swap for a new motor
also if anybody would want to swap out the motor for me, name a price and let me know...or if you have one for sale

 

[comppwizz]

you can get a master rebuild kit from here http://www.engnbldr.com/ToyotaHotLicks.htm
for $219.00. add another 200 for the head and 150 for the crank
550 to 600 for a total rebuild on the motor thats in there now.

and if you can get it all here I will do all the work put the motor togather and in stall it for 350.00

 

[sha_ba_do_bang]

depends whats blown and how worn it it, it might need machine work which is very expensive for that motor


Brendan

 

[upnover]

depends whats blown and how worn it it, it might need machine work which is very expensive for that motor
Brendan

Maybe in Wilmington, but not here.
We charge by the cylinder for boring, and honing. Not by what it is. Biggest difference is what ring, as to what finish hone we do. Head work is reasonable. Basically depends on how may valves. T surface a I-6 is the same as for a V-6, 4 or what ever. Same per head, unless angle milling or so on.
Give us a shout if you consider building what you have.
Morgan and son machine shop
828 433 1586 M-F 8-5

 

[Mr_DIY]

good info upnovr.... very nice indeed

 

[Ratman]

X2 on Chip, that motor is no more expensive to machine that a SBC. I had my block done for 75 bucks. The head, 50 bucks. Plus 35 to lightly cut it with a broach and fine stones. Where you get into money on any block os sleeving them and redecking if needed.Plus they are about as hard to build as a briggs and stratton.