3/4 ton front for 60 brake brackets

[userbmx1315]

looking for some 3/4 ton brake brackets for my front ford 60 axle. wanting to run 15" wheels. i'll have to check the back spacing.

who sells the brackets?

 

[foreman1063]

TMR customs.

Here ya go

 

[jeepinmatt]

Makita/Dewalt/Milwaukee/Porter Cable/Metabo/Hitachi all sell a really good kit. Don't be afraid to grind em, its really not that much to grind with 3-1/2" backspace wheels. And the braking from the Ford dual piston calipers is very good with a stock master cylinder.

 

[userbmx1315]

from what i've read, the ford ones cant be ground to fit like chevy.

 

[jeepinmatt]

I ran them on my jeep for 6 years. I'm confident they can.

 

[drkelly]

Run 2.75" BS wheels. That is what I had on my cab truck.

 

[userbmx1315]

Ill have to check my backspacing. I have some 1.5 on there too and they seem like ALOT of material has to be removed.

 

[ol'Jeeps]

Im interested to know...using the TMR kit with the Chevy calipers and rotors, do you still need to grind for 15" wheels?

 

[GubNi]

I sell them also. I am sold out, but have some on the way.

When you go 1 ton get 2.75" backspacing regardless of brakes. With 3" minimal back spacing is required. With 3/4 ton brackets and caliper you may still need to grind on them some depending on your wheel.

 

[userbmx1315]

4" backspacing then 1.5" wheel spacers.

 

[ol'Jeeps]

thx

 

[userbmx1315]

Thats what mine are. Not saying they fit. Guess ill break out the grinder to see what gives