I am printing a piece now and selected 'print outer walls first' and so far it seems to look better (only about 1/2" tall so far). These are printed with 0% infill and 0 top/bottom layers. They have an inner structure that is considered a wall. The pictured piece is lighter than the designers weight, I think their weight is based off regular PLA. In cura it did say it would weigh 9-10g but it is only 7.6g.
Current printing piece actually looks excellent so far. WAY better than this one. And before you mention stringing, from what I have read and tried, it is impossible to not have stringing with the LWPLA. Some of the plane designs now are designed so each layer there are no retractions at all to eliminate stringing.
