The back gate has warped and settled just enough that the latch no longer latches. Pretty common problem. Commonly fixed by loosening the screws and jiggering it a bit, but it's way off and I know that after some more weather changes it'll probably shift again anyway.[ATTACH=full]403243[/ATTACH]
So a 3D printed a little knob extension for the tip using CF-PET so it'll be really durable and won't crack with exposure and use.
[ATTACH=full]403244[/ATTACH]
[ATTACH=full]403245[/ATTACH]Design time: 90 seconds
Print time: 15 mins.
Time spent outdoors on a hot as balls day fixing a gate: about 2 mins.
