Printed another chassis today. This was the first thing I have printed out of ABS on the Bambu (and I only ever printed a couple things out of ABS on the CR10). NO test print, just sliced it and pressed print. The quality is absolutely amazing.
I am not sure which will be better for these chassis, PETG or ABS. The light blue is PETG, dark blue is ABS. If anyone is interested in one I can print more, but I will also be putting some at Anderson R/C for him to sell.
Also printed a new plane, still have to paint and assemble it, but all the parts are printed. The LWPLA is tricky even on the Bambu, BUT I didn't do any test prints, and no failed prints, just some have more zits on the outside that I like, but it is fairly easy to sand, and once painted and in the air, I won't see any of it. Designs modeled there they can be printed in vase mode with no infill would be ideal, the starts/stops cause the issues as the LWPLA constantly ooozes out, but it has to be printed at a high temp to make it 'expand'.
I also made a ventilation duct today specifically for printing ABS. With the chamber fan on 50% I can't smell it at all.
