727/300 in a YJ, front DS clearance issues

jeepeater2003

Member
Joined
Mar 21, 2005
Location
raleigh
So im finally starting to work on the jeep again and was going to make my tranny mount tonight and got to looking and the front DS hits the tranny at ride height.

What have you all done? Any pics.

I have searched and really haven't found anything that could help. Just other people with the same problem. haha


Tyler
 
Also it is a Pass side drop...
 
Most people with that combo run a small lift to help with that. Have you shifted the motor towards the drivers side any? Just a little bit coule be a huge help!

Also your set up sounds exactly what I have going into mine, only with a CJ frame.

Pirate4x4 has a few threads dealing with this...
 
Ya. I was reading on pirate last night. Looks like my options are two peice front, move the drivetrain to the driver side some, take the ds and basically cut out a portion and put some 1" solid rod where it comes close to the tranny. Just not sure what im going to do now.
 
Back
Top