CoonDogger
Well-Known Member
- Joined
- Aug 21, 2006
- Location
- Jacksonville, NC
What makes and models do I need to look for in the junk yards to find bucket seats to fit and 84 yota pickup with a bench?
84 yota bucket seat conversion
- Thread starter CoonDogger
- Start date
SEAIRESCUE
Active Member
- Joined
- May 8, 2006
- Location
- SO Pines
Yo,
I believe 84 - 95 will work. I put some buckets in my 87 and the bucket seat mounts were already in place. There was not a provision for the center (seat belt) latch....so I had to rig something there. I suspect you may be able to go all the way back to 1980 as well. Junk yards use a Hollander Index to tell you what parts interchange. If you go to one, ask them for the book interchange data. I would also get the inner seat belt parts, the latching half, to save you some grief. The bench shares a common buckle that looks stupid with buckets.
My $0.02
I believe 84 - 95 will work. I put some buckets in my 87 and the bucket seat mounts were already in place. There was not a provision for the center (seat belt) latch....so I had to rig something there. I suspect you may be able to go all the way back to 1980 as well. Junk yards use a Hollander Index to tell you what parts interchange. If you go to one, ask them for the book interchange data. I would also get the inner seat belt parts, the latching half, to save you some grief. The bench shares a common buckle that looks stupid with buckets.
My $0.02
91yota
New Member
- Joined
- Sep 7, 2005
- Location
- Charlotte, NC
i like mitsu eclipse seats in my yotas 