Aftermarket pillar bearing

metalmiles

metalmiles

Well-Known Member
Joined
Nov 7, 2012
Location
Rock Hill , SC
I'm rebuilding my 2 piece front drive shaft after my last snapped and exploded my pillar bearing. Anybody know of a place that makes good and strong aftermarket pillar bearing?
 
In Charlotte, look at www.wttool.com , WT Tool, 704-527-4071, 4200 Barringer Dr., just off Clanton Rd., & I-77. Their a GREAT supply house!
Don't know How I mixed your request up, it happens; I was thinking of Steering Shaft!
Probably Pillow Block, is what threw me! Sorry
 
Last edited:
For what it's worth, its much more commonly a "pillow" block or carrier bearing rather than pillar bearing. Anyway the new ticket as of a couple years ago is to use a carrier with a yoke on each side and two separate driveshafts, but that could have changed by now too. Might try contacting Oliver's driveline on the board here.
 
braxton357 said:
For what it's worth, its much more commonly a "pillow" block or carrier bearing rather than pillar bearing. Anyway the new ticket as of a couple years ago is to use a carrier with a yoke on each side and two separate driveshafts, but that could have changed by now too. Might try contacting Oliver's driveline on the board here.
Click to expand...


Haha thanks Man you southern always adding the -er sound to everything kinda like winder but good to know but thanks for the info
 
Call pj at m and m offroad. He makes a BEEF one that uses 2 1350 yokes and is rebuildable using tapered bearings.
 
Back
Top