Secondhand Tin Can.

I forgot your xj is a 2000, mine was a 99, so my experience wouldnt mean much since it's a different exhaust system.
Its leaking at the clamps so I'm hoping I can tighten them down and solve the issue.

Sent from my SM-G892A using Tapatalk
 
Kieth, check your castle nuts holding your tie rod ends at the knuckle. Also check that the back of the tie rod is rubbing the track bar mount on axle side.

Currie correct lyncs are bad for the castle nuts to come loose
 
I had this crazy idea today for a belly skid. Let me know what yall think. I want it to be easy to remove but strong enough to take a hit.
 

Attachments

  • Engineering.pdf
    62.3 KB · Views: 209
Finally got a truck and trailer. I think I had a tad too much of tongue weight during the test tow.

Hopefully in the next two weeks I'll be changing the gear oil in the jeep and replacing the power steering pump. At idle the tires arent wanting to turn too easy and the pump makes alot of noise.
e3c43af980533e8797760c7fb7f12560.jpg
e3e55ca33b9dce937c1fab59a3014004.jpg
1c5d01cde843941464d3e63d4aa996d7.jpg


Sent from my SM-G892A using Tapatalk
 
On this episode of working on a 20year old shitbox. I stripped a bolt hole on my rear diff. I also shattered my power steering pulley trying to get it off.
0d0e0753df527ae3c6b2c172bc622833.jpg
a6d4525032d02bbfe745b613b458396d.jpg


Sent from my SM-G892A using Tapatalk
 
The jeep is up and drivable. Got the new power steering pump and pulley in.
5e475c6fdf0c23a7fc27a93aad7bd8d5.jpg
5077cda3a409fc587758e999d4ffac0c.jpg


Sent from my SM-G892A using Tapatalk
 
After backing up my trailer at night once I decided I needed some lighting back there so I added two led pods. I wired them into my reverse lights.
13f66160061cd24b3a7a09ea1bed67ff.jpg
7e3c9ef173200d0a5362d3a173e651e0.jpg
57cf879c5a02d2acf6d286925db73f81.jpg


Sent from my SM-G892A using Tapatalk
 
After backing up my trailer at night once I decided I needed some lighting back there so I added two led pods. I wired them into my reverse lights.
13f66160061cd24b3a7a09ea1bed67ff.jpg
7e3c9ef173200d0a5362d3a173e651e0.jpg
57cf879c5a02d2acf6d286925db73f81.jpg


Sent from my SM-G892A using Tapatalk

i need to do the same as well!
 
Great now I'm gonna have to do this too.

When you say reverse lights, is there already provisions on the trailer plug for reverse lights?
 
Great now I'm gonna have to do this too.

When you say reverse lights, is there already provisions on the trailer plug for reverse lights?

Never mind, just saw you other thread. Getting educated.
 
I think I have started something.....

To summarize be prepared to get a new plug. I recommend ordering a 7 block box. To make it easier and to make it easier to swap out your plug if the need arises.

I now have a spare plug and wire. Along with a new wire. Both have each wire labeled with what it is. With the spare plug and wire I wont have my reverse lights but I rather be able to quickly splice that plug in and have brakes. If for some reason mine got damaged while on a trip.

Both will always be in the truck if I'm towing just incase.
 
Well I decide it was time to replace the spark plugs since they havent been change since the motor went in. Also found and dealt with the exhuast leak I had.

I wish I could have just welded it but I used putty then wrapped it. I forgot to take the plastic wrapper off the first couple wraps.
17772b1e2311db334cdeba404c3beb94.jpg
87759940dd3dbe096c71732e5f60e69f.jpg
22b2c0feb53ca18591533b9c82f8061e.jpg
eaf52db2e0a365e2f1aeb4c70cf63181.jpg


Sent from my SM-G892A using Tapatalk
 
Next big step for the jeep will be a hybrid cage and suspension seats. This will probably happen end of the year or next year.

Right now I'm planning on going with the welderd cage. My goal with the seats is to drop them as low as possible. This way I have plenty of head room.

For right now I'm still looking for skid plates.

Sent from my SM-G892A using Tapatalk
 
Arts and crafts time. I also just bought a welder.
8e53d875f99e3fb00977d99f6640dd1c.jpg


Sent from my SM-G892A using Tapatalk
 
Dont hate on the fabrication skills but leave tips so I can improve. This is also the first time I have ever done anything like this.

I messed up on ordering my 2x6 I need 65 not 56. So I took one and cut 7 inches off and welded it to the other to make a completed one. I decide 63 would work better than 65 so I can still trim my fenders a little more if need be.

Debating on welding a plate to the bottom of the joint.
6aaad3fd79f8650c0494cae9fa11df16.jpg
9fe5ae6a7303830cdcd43acf3ef9199c.jpg


Sent from my SM-G892A using Tapatalk
 
Last edited:
And the other side is done.
be131082b8d8b3e6a172c357f3f386c8.jpg
771cb8940398d26b66d8a1295d747b62.jpg


Sent from my SM-G892A using Tapatalk
 
It looks like you may need to turn the heat up a bit, looks like they could penetrate a little better. Either that or slow down a bit so they’re can “sink in”. Otherwise looks good.
 
It looks like you may need to turn the heat up a bit, looks like they could penetrate a little better. Either that or slow down a bit so they’re can “sink in”. Otherwise looks good.
Yeah adjusting my speed is the thing I'm struggling with right now.

Sent from my SM-G892A using Tapatalk
 
I got one side almost done. I have two more supports to weld in and trim the fender. Welding the door sill to the 2 by 6 was a PITA.
9a02bb91341f590f5e8d60c9c34fa846.jpg


Sent from my SM-G892A using Tapatalk
 
I finally got the driver side done and painted. Welding upside down and side ways sucks.
5fb54b64739320c26f280b1dd23e7e67.jpg


Sent from my SM-G892A using Tapatalk
 
Got the passenger side ready for the supports. My welding has improved on the top edge. I finally got my technique down with my flick over to the sheet metal.
474ee571fa16f5731c562894ecb0d477.jpg
801c488310b14174ea182e1d5073a6a5.jpg


Sent from my SM-G892A using Tapatalk
 
Last edited:
Back
Top