cherokee UCA bushing that accepts larger than factory bolt?

hurt4x4

hurt4x4

Well-Known Member
Joined
Sep 12, 2012
Location
Greensboro
ok so i bought iron rocks long arm set up. Ive heard lots of mixed things about them but whatever, im gonna wheel it and if it brakes it brakes. I would like to upgrade the one 10mm bolt in the upper link though but i cant seem to find a UCA bushing that accepts a larger bolt. Does anyone know where i could find one? drilling out the sleeve just dosent seem like a good idea to me.
 
Brakes are for stopping.

I hope your long arms don't break.

Check currie.
 
OK well I hope nothing actually "breaks" just having mixed feelings after buying the kit and thought I would put a little larger bolt in, but I will check Currie, thanks.
biggoofy said:
Brakes are for stopping.

I hope your long arms don't break.

Check currie.
Click to expand...
 
Call Andy at ironman4x4fab and sell the iro junk. They make good parts but I don't like the design and that it limits you to just that axle.
 
biggoofy said:
Call Andy at ironman4x4fab and sell the iro junk. They make good parts but I don't like the design and that it limits you to just that axle.
Click to expand...
i will definitely consider ironman in the future(probably should have in the first place) i just dont have the funds now. I checked currie and they have jonny joints that will work with a 1/2in bolt but i was really just looking for a bushing
 
Ruff stuff might have a bushing.
 
already checked, dident find anything on the site. a jonny joint will work if i cant find one. Thanks for the help!
 
RenegadeT said:
why?
Click to expand...
Its olny one 10mm bolt connecting the upper mount. While i doubt i'm gonna go and break it the first time out i would just like a little larger bolt for added security and durability.I'm pretty sure the RK 3 link uses a larger than factory bolt but it is also a sperical joint.
 
when i build 3 link setups on jeep's i machine down a dom sleeve to fit into the housing then a poly bushing with 9/16 bolt can be used.
let me know if i can be of any help with these parts.
asphotos_b.xx.fbcdn.net_hphotos_ash4_419996_225780064182206_1483929097_n.jpg
 
novacayne75 said:
when i build 3 link setups on jeep's i machine down a dom sleeve to fit into the housing then a poly bushing with 9/16 bolt can be used.
let me know if i can be of any help with these parts.
asphotos_b.xx.fbcdn.net_hphotos_ash4_419996_225780064182206_1483929097_n.jpg
Click to expand...

that's exactaly what im looking for, if you could send me a price on what it would cost for everything please! thanks!
 
Back
Top