exhaust almost done.
was able to use most of the crossover tube from the lt-1, and retained the exhaust after the crossover. all left to do here is wrap it and the motor then goes in for the final time; and saturday off to alliance hose to see my friend billy for some new engine plumbing! hopefully vroom-vroom by sat night!!!
used v-band clamps instead of collector gaskets
[ATTACH=full]101066[/ATTACH]
[ATTACH=full]101067[/ATTACH]
[ATTACH=full]101068[/ATTACH]
[ATTACH=full]101069[/ATTACH]
[ATTACH=full]101070[/ATTACH]
[ATTACH=full]101071[/ATTACH]
[ATTACH=full]101072[/ATTACH]
egr stuff blocked off
[ATTACH=full]101073[/ATTACH]
even with the mast pan fitting locations, it's still a tight fit for accumulator fittings
[ATTACH=full]101074[/ATTACH]
[ATTACH=full]101075[/ATTACH]
