D300 Front Output upgrade machining

Yay!Gurrr

Yay!Gurrr

Better Faster Stronger
Moderator
Joined
Mar 17, 2005
Location
N. N. Raleigh, NC
D300 Front Output upgrade machining

Ok after sending my front housing retainer to HighAngle for them to do nothing with it. He's informed me that the case is what gets machined. The install document clearly says front retainer is what is machined.

http://www.jbconversions.com/pdf/15-1103.pdf

I guess my old junky dana 300 isn't as good as an atlas or what ever but regardless I still need the retainer machined.

So can anyone in NC do this ? The machining diagram is on the last page of the install document.
 
Midstate machine in Mt Ulla. Ask for Tim Williams, tell him I refered you.

Cambells Machine here in Lincolnton also can do it.
 
I can do it. I actually have a spare input housing, and can machine it and send it to you. Shoot me a PM.
 
jeepinmatt said:
I can do it. I actually have a spare input housing, and can machine it and send it to you. Shoot me a PM.
Click to expand...
Yes he can. Matt is a good dude.
 
ok thanks,
I actually need to have mine machined because I cut the top shifter part off to fit my custom twin stick stuff and have plugs in the switch holes etc.. SO as soon as I get it back for the bestest most awsomest driveshaft place on earth :shaking:

I'll have one of you guys take care of it..
 
I don't know what Jess was thinking. He should know that the case isn't what gets machined...


Anyway, Scott can do it.
 
Back
Top