Dana 300 flip questions...

mtmech

Member
Joined
Oct 25, 2010
Location
camp lejeune nc
I know ima get flammed for this but here goes... Flipping the 300 is just flipping it to driver drop and messing with the sticks? Or is it a lol more than that? I've been tryin to find out by searchin but can't... On pirate4x4... On here as well as jeepforums and google... Only thing I can find are making a new shifter and what not... Any and all advice would be nice to have. Thanks in advance...

Mark
 
I would be intersted in kowing how this works as well. Seems to me if you flipped the Tcase over, the control levers would be below the Dshaft. Not sure how that would work.:popcorn:
 
It's pretty much that simple. You'll need a clocking ring to flip it and set it at the angle you want.

For shifters you can move them to the top of the case. What used to be the bottom example http://www.pirate4x4.com/forum/showthread.php?t=161815

Other option is to leave the shifters where they are and use angled levers like what DD machine sells or do cable shifters.

Pretty simple only other things are moving the breather and fill holes.
 
Don't mind my dumb questions... Just to get it right... Clockring... Fill/drain holes.. And shifters... That's all that's needed to flip this correct?
 
Back
Top