KuruptedKrawler38
Well-Known Member
- Joined
- Feb 18, 2007
- Location
- Asheboro, NC
Is there a good dana 44 pinion guard for sale online? I have saw all the gliders but do not like them.
dana 44 pinion guard
- Thread starter KuruptedKrawler38
- Start date
paradisePWoffrd
Recovering Project Junkie
- Joined
- Nov 5, 2005
- Location
- Newton, NC
the problem making a d44 pinion gaurd, is it will haveto be weld on, or really big... 14b and 9" have a flange that covers the pinion bearings, so it gives them a to place to bolt a guard to.
If you dont mind welding something on, it should be too hard...
If you dont mind welding something on, it should be too hard...
houdini
Active Member
- Joined
- Feb 2, 2006
- Location
- Raleigh, NC
you could try something like this. not sure if it'll meet your needs.
its for a nissan h233b, but that's not too much larger than a d44. might work.
http://www.purenissan.com/rear_truss_skid.htm
https://www.4x4parts.com/nissan/skid-plates-4x4parts-skid-plates-c-90_415_660.html
its for a nissan h233b, but that's not too much larger than a d44. might work.
http://www.purenissan.com/rear_truss_skid.htm
https://www.4x4parts.com/nissan/skid-plates-4x4parts-skid-plates-c-90_415_660.html