Death Wobble

[Rangerluis]

I'm not sure which of these threads this goes in but this seems fitting.
I have a ''03 2 door Jeep Wrangler Rubicon on 35's. I got this jeep used 3 months ago.
i noticed that while pointing the steering wheel straight actually when I got out and looked one wheel was slightly pointing out. So we tried to adjust the steering rod but it was rusted well in place. So I figured it was time to up grade the steering rod to a heavy duty one from Rugged Ridge. We got it in today and while driving home I noticed when I hit a hard bump or pot hole I got worse death wobble.
When we installed it, we tried to get the wheels as straight as possible.
So should I try to point the tires in or is there something else that needs to be swapped out?
Any ideas or questions to help figure it out send them to me.

Thanks,
Luis

 

[pgaloustian]

did you get an alignment once ya put the puged ridge kit on? how much tire psi ya runnin?

 

[Rangerluis]

Running about 32 PSI, and no we kinda did a redneck alignment. But great suggestion, should have thought of that before I posted a thread.

 

[Lorenzo816]

could be the track bar bushing.

have to get pressed out and new one pressed in without ruining the new one.