Mr Treadway since I have to pull the head to replace new lifters (I will replace all lifters with a new cam) should I take the head and have new valves installed?
Parts to replace list:
#1-Rocker Arms and Bridges
#2- Push Rods
#3- Lifters
#4- Camshaft
#5- Head Gasket
#6- New Head Bolts
#7- Manifold Gasket
anything else I'm missing?
I will be able to save a few bucks on parts as my wife is manager at O'Reilly's
any tips, advice, words of wisdom I should know before I jump both elbows deep into this?
