Hey guys Im setting up gears in my 4runner, and would appreciate if you guys could take a look at the gear pattern and tell me how I should adjust it. Ive been using Zuk's site as a reference and worked my way down to 55 thou shim on the pinion and 8 thou on the backlash. These are the results.
Coast Side
[ATTACH=full]194781[/ATTACH]
Drive Side
[ATTACH=full]194782[/ATTACH]
Gears are G2 gears for reference and the diff has an ARB locker in it if that makes any difference. It is also going into a v6 toyota 3rd. I already ground down the pinion gear per ARB's instructions since it was hitting the carrier.
