getting tj ready for 1 ton swap

[baby hulk]

getting my 05 tj sport to swap in dana 60 king pin and 14 bolt.
i cant find the upper mounts for the dana 30. i already have the rusty's long arm so im going to try to stick with the suspention set up i have know. if any one know were i can find mounts please let me know thanks

 

[wht01stroke]

call and speak to rusty he can make just about any bracket you need

 

[drkelly]

http://rubiconexpress.com/BuilderParts/Product.aspx?folder=BPBK&part=RE9968

 

[braxton357]

Might have a problem fitting a stock driver side upper control arm mount on that hp60. Welding to the centersection sucks.

 

[MarsFab]

Your probably gonna have to fab your own upper control arm mounts because the center section of the 60 is much taller than a D30. The drivers side mount will be higher than the passenger unless you can find one thats made long to cut down. Good luck with the project I look forward to seeing how this one turns out. It should be pretty tough.