What is the easiest, way to move the rear axle back approx. 4-5 inches in a K-5 rear leaf spring. Here's the deal, I've done a body swap from an old rusty K-5 to a newer 91 S-10 4 door blazer. So heres my delima i need to move the rear axle back in order to get it centered up in the rear wheel wells. I can't move the body forward because it's already almost up against the motor. I have 52/53 inch stock rear springs, unfortunatley i have already welded in my shakle flip before the new body went on the frame. I don't want to link the rear yet, I prefer to keep it leaf sprung. Thanks
