Installed a 4" lift on the waggy...

spraypaintman

spraypaintman

Well-Known Member
Joined
Mar 21, 2005
Location
Kernersville
Got it from Greg (smithit) thanks! Took off the day yesterday to work on it. Perfect day....

MVC-001S.jpg


MVC-003S.jpg


MVC-005S.jpg


MVC-013S.jpg


MVC-019S.jpg


Next will be a shackle flip on the rear.

:beer:
 
Looks good. Watch the shackel flip in the rear. I wasn't paying a lot of attention when I did mine and I ended up with 8 inches of lift out of it. It be easy to make it to 4 inches. I was going to 6 and ended up at 8.
What springs did you use on the front?
 
Looks good!!
 
Thanks guys! For the shackle flip on the rear I'll probably just cut off all of the stock bracketry and weld on a new mount to get the jeep level. Not sure what kind of 4" springs they are.

:beer:

Can you say...Saggin' Waggon....

MVC-014S.jpg


MVC-011S.jpg
 
Down&Dirty said:
Looks good. Watch the shackel flip in the rear. I wasn't paying a lot of attention when I did mine and I ended up with 8 inches of lift out of it. It be easy to make it to 4 inches. I was going to 6 and ended up at 8.
What springs did you use on the front?
Click to expand...


X2
 
On my buddy's wagoneer, we've done a SOA with an add-a-leaf in the front, shackle flip with a 2" block in the rear. It gave it about 8". We've also done a hi-steer on it.
 
Cool, got any pics of the shackle flip?
 
Back
Top