SCI_Prog - Google Drive
The link should work. Lmk if it doesn't. Download all the files (you really only need readme.txt, the exe, main.bin and dump.bin, the others work with BB board or one modified like mine with the at28c256)
Try it out. Let me know if it works for you. I'd be interested in a copy of your bin. I'm 3/4 done with the PCM bench simulator, then I'll be able to test out the cal I've been working on, though the basics are done (fuel, spark, etc), what I'm interested in doing is adding another fuel and spark map to handle boost, so I need far more than just average tuning for a stroker, etc. That's plainly possibly at this point. Possible future mod might be an auto tune on the fuel map, possibly knock sensor as well (assuming I can find a free input, I could make a separate knock detection board with a digital interface to the PCM to retard timing, but I'm getting off track and way into the future. {Heck, if there's enough code space, I could make it save the retard, which I'm pretty sure there's plenty of code space left, at least in my 356 cal, and removing non-essentials would free more.. }) one short term goal was to fix cruise control because it turns off if rpm changes more than 750 rpm because it's a manual cal & I have an automatic.
