The last few days have been wiring, nothing really to show, but today I tied down and tightened up most of the hydro lines, made the intake system, and decided the solenoid box for the front winch looked shitty mounted on the winch, so I began relocating it.. ugh, what a PITA.
The solenoid pack in its new home... (nowhere else to put it)
[ATTACH]5236[/ATTACH]
The intake setup - a "Cobrahead" 90 to a standard 90, some 4" tube, then a reducer to 3.5" for the MAF, and an AEM "dryflow" filter - none of that damn oiled gauze... I still need to make a little bracket to stand it off the engine slightly.
[ATTACH]5235[/ATTACH]
AND, WE HAVE STEERING!!!! Well, kinda. We have rear-steer at least. I didn't bleed the front yet. Once the pump started moving fluid (I guess the valve was stuck), it was CAKE, thanks to this brilliant idea from Blkvoodoo.. (I'll do a tech writeup on it later, it's a GREAT timesaver though..)
[ATTACH]5237[/ATTACH]
