Leaking TSL

khwrx

Active Member
Joined
Dec 10, 2006
Location
lincolnton nc
like the title says i got a leaking tsl i bought from some and i didnt notice the chunk of bead that was missing. well i had it mounted and i will leak down to flat in a day. i checked from what i was told there is not tubes for a 36 tires out there that will work . other than beadlocks anyone got anyother ideas ?
 
If you are not wanting to get beadlocks, you can put a tube in it. Just get one for the wheel diameter and width. Natural Rubber tubes are a litle more expensive but last longer. The tube doesnt have to be for a 36" tire, it should work just fine.
 
I'm sure someone on here will chim in with a part number but yes their are tubes to fit 36's
I had a set that had the same problem.
Also another way to do a home repair is windshield urethane adhesive on the spot that is chunked out just make sure you grind down to fresh rubber and let it dry in a warm place for a couple days.
If its really bad you can glue the tire to the rim with it but you will have to heat it with a torch if you ever want to remove it.
 
If it's on the bead, you might can get away with Bead Sealer. I put that on some crusty old rims I had and it sealed it up. of course if it's too large a chunk, not much is going to stop it.
 
Thanks guys I dropped my tire off at my tire guy and he got me that tube you recommended , going to pick it up in an hour or so . Thanks again
 
Back
Top