spent some time working on the b2 this weekend. took out the old pitman arm and installed new seals. i figured out that the snap ring didnt fully insert itself because of a spacer that i put in there. works just fine now.
also clearanced the cross member some more, also put the drop arm in.
[ATTACH=full]96216[/ATTACH]
[ATTACH=full]96217[/ATTACH]
drove it around some, it's got a bit of bumpsteer to it. so i may need to change some stuff around. thinking i may move the tie rod under the knuckle and leave the DL on top of the pitman arm. i was also thinking i could redo the upper TB mount and lower it some.
did some work to the bumper....cut off the ends
[ATTACH=full]96218[/ATTACH]
tacked them up higher
[ATTACH=full]96219[/ATTACH]
gonna add 2 more pieces
[ATTACH=full]96220[/ATTACH]
and i've got some issue with the pass front tire, i think i need to reinstall the ball joints
[ATTACH=full]96221[/ATTACH]
