My truck

cjparker12345

Member
Joined
Jul 17, 2007
Location
Mooresville , NC
1987 Chevy K10 Short bed. dana 44/14 bolt swap both open with 4 wheel disc's with stainless lines. 350 w/ tbi, built 700r4, NP208, 6" springs/ 2" springs with 4" blocks. 36x14.50-15" TSL Radials. and black steelies. nice interior with lined floor, custom seat, new dash and alpine audio.
a couple pictures before I started workin on this thing. First is the day after we bought it.
View attachment 113574
View attachment 113575
ai64.photobucket.com_albums_h171_cjparker12345_788166227_l.jpg_1572ed42a0f8cd0526563f42aaa20bb7.jpg

View attachment 113577
View attachment 113578
View attachment 113579
View attachment 113580
 
Flex pics after the axle swap

Flexin out in some rutts after the axle swaps.
View attachment 113581
View attachment 113582
View attachment 113583
View attachment 113584
View attachment 113585
Sorry for the fuzzyness of the pics. camera wasn't set right.
I still have plenty to do on this thing. the frame is bent, it seems, where the cab and bed line up. That will be bent back out and then every possible place on the frame will be plated. The suspension needs to be redone, Using a rear flip and zero rates. all the bushings need to be replaced. hope to clear
37-38's with new suspension and minor trimming. new shocks. Lockers front and rear. daul Transfer cases.
 
How did the frame get bent? It doesn't look bent in the pics when you first got it, but it really looks bent in the pic where you're doing the axle swap.
 
train tracks

being dumb and young.... train tracks and at least 5 feet of air for all four. most likely going to need a frame swap. keep an eye out for one near mooresville. 28115:driver:
 
Back
Top