My XJ project

marvilusone

Well-Known Member
Joined
Oct 21, 2007
Location
Charleston, SC
This is my newest project for the time being. I will have it finished just in time for the Thanksgiving day run at Uwharrie.
Rustys 4.5" kit, 33" Boggers, Skyjacker shocks, Custom front and rear bumpers, Lots of cutting, Gutted interior, Welded rear. In the near future it will be getting fullwidths, SYE, bigger tires and a new engine. Note - I know it's missing the rear axle. The UPS man was slack on Fri and I dont get my rear leafs till Mon. Other than bolting in the rear she's ready to go.
100_1693.jpg

100_1694.jpg
 
I like the grooving on the pass. side bogger, why not the other one?
 
there are two like the passenger side one and two like the driver side one. When I originally did them I forgot the design of the passenger side so went with something easy and did the driver side design on two of them and figured I would run them up front where there was more weight and then when I found the design for the driver side I went back and did the other two with plans to run them on the back.

I have since been told that I might have messed up and done them based on side to side on accident. Easy fix, just unmount and remount two of them.
 
Back
Top