WillnFox
Un-Known Member
- Joined
- Nov 12, 2007
- Location
- Saxapahaw, NC
I have a HP D44 from a 79 Bronco, has Cast Wedges that I need narrowed.
It is already setup to with 4.56 gears & a Detroit so it is a good axle.
What I need is the Passenger side shortened to bolt into an Early Bronco.
I know there are several ways to do this:
http://d44tech.com/Narrowing_HP_D44.html
http://d44tech.com/hp_cast_grinder_narrowing.html
Will be running an Early Bronco Passenger Side Shaft.
http://www.amazon.com/USA-Standard-Gear-W38810-Differential/dp/B0078U8SJU
Would like to know a good shop somewhere between Greensboro & Raleigh to get this done.
Trying to keep this economical but don't want to skimp and receive bad craftsman ship.
It is already setup to with 4.56 gears & a Detroit so it is a good axle.
What I need is the Passenger side shortened to bolt into an Early Bronco.
I know there are several ways to do this:
http://d44tech.com/Narrowing_HP_D44.html
http://d44tech.com/hp_cast_grinder_narrowing.html
Will be running an Early Bronco Passenger Side Shaft.
http://www.amazon.com/USA-Standard-Gear-W38810-Differential/dp/B0078U8SJU
Would like to know a good shop somewhere between Greensboro & Raleigh to get this done.
Trying to keep this economical but don't want to skimp and receive bad craftsman ship.