Floor, top side progress... inner rockers still need some attention in a few spots, nothing major. Two pinholes I reamed out a bit to address on the passenger side footwell:
[ATTACH=full]427103[/ATTACH]
Found water intrusion in the passenger rear corner that did this next to the passenger inner rocker. I'm just going to patch it with a small piece of steel and JB Weld epoxy, as the metal's too thin to weld where the 3 holes are:
[ATTACH=full]427104[/ATTACH]
Rear corner on the passenger side- all that seam sealer needs to come out to assess what's what. The circled spot is where the water's been coming in to rot the passenger side:
[ATTACH=full]427106[/ATTACH]
Rear driver's corner also needs some digging in and addressing:
[ATTACH=full]427105[/ATTACH]
