pilot bushing

guffey24

guffey24

Well-Known Member
Joined
Jun 7, 2006
Location
Hendersonville, NC
just wondering what pilot bushing I would use for a AMC block and a T-19 ford transmission

to me it looks like the front output shaft on the t-19 is the same size as the one on the t-150

If that is the case I will use a stock pilot bushing
 
not totally certain on the T-19, but it's very similar to the T-18, and being a Ford version, you may need the big Bushing that sits in the outer recesed area of the flywheel.

Best Bet, I'd contact Parts Mike and ask him. He'll also have the bushing you need.

http://www.partsmike.com/

Oh, and post up what you find for future reference on here.
 
well I have a big bushing that sits on the outside of the crank

I got it from partsmike

I used for the nv3550 tranny that I had in the CJ

I guess I need to find out If the nv3550 and the t-19 have the same tip diameter
 
Back
Top