Project vehicle any kind....

spraypaintman

spraypaintman

Well-Known Member
Joined
Mar 21, 2005
Location
Greensboro
I'm looking for a project vehicle for me and my kids to work on. Maybe an older truck, muscle car or jeep cj7 anything cool really. I was going to buy a cj7 from @sawdoff but not sure what happened there kind of dropped out of existence lol. It's all good though no worries. Let me know what ya got! Thanks :beer:
 
Last edited:
Gmc c6000 4x4

20240601_092903.jpg

20240526_124413.jpg
 
That is badass haha! Specs and price?
 
Last edited:
Pless said:
Price?

I have a 79 J10 golden eagle that would be a project if interested. The title is weird though.
Click to expand...
ok cool how much and what are the specs?
 
Last edited:
I would let it go for 1200. That is an old picture, it makes it look better than it is. I'm at the beach this week, I can get better pictures this weekend if you want.

The title is in the PO,s name, my understanding is he passed away. I haven't taken the time to pursue getting the title changed over, so I'm not sure what would be involved with that.

KIMG0345.JPG
 
Ok nice what engine and transmission is in it?
 
To expound on that a little...
I bought it a few years ago with a busted transfer case. I swapped in another case, fuel pump, and a carburetor and got it running and driving. I putted around the house in it some, but never road drove it. I think it has some fuel issues or just bad gas in the tank, because it never ran very good. I lost interest in it and it has set since, I tried to crank it the other day it would run on starting fluid but wouldnt pickup fuel.
I have the original wheels and front bumper too, they are in the bed.
 
I've got a 1980 scout traveler I'm going to be looking to unload soon. Runs, steers and stops. Has a disc dana 60 in the rear and the stock 44 front. 304, auto, dana 300 (with a spare case). Interior seems good, just lots of spare parts everywhere. Obv like any scout, some body rust, windshield frame, etc. Lots of spare parts came with it - a slightly better windshield frame, doors, rockers, driveshafts, body mounts, fuel lines, extra wheels, etc etc. It was my last post-covid impulse purchase and just overestimated my free time to take on a resto/mod project. One day I'll wish I'd got it in drivable shape. I'll be looking to get 3500 out of it.
 

Attachments

  • PXL_20230123_212131380.jpg
    PXL_20230123_212131380.jpg
    139.5 KB · Views: 35
  • PXL_20230123_212218030.jpg
    PXL_20230123_212218030.jpg
    167.8 KB · Views: 35
  • PXL_20230123_212233039.jpg
    PXL_20230123_212233039.jpg
    178.9 KB · Views: 37
  • 296581017_10160221454324662_2008050072365106740_n.jpg
    296581017_10160221454324662_2008050072365106740_n.jpg
    252.5 KB · Views: 40
  • 296681253_10160221454309662_1123480113717298752_n.jpg
    296681253_10160221454309662_1123480113717298752_n.jpg
    247.2 KB · Views: 37
  • 295930550_10160221454314662_6481836307894290475_n.jpg
    295930550_10160221454314662_6481836307894290475_n.jpg
    257 KB · Views: 36
  • 296268355_10160221454319662_1159710707734696534_n.jpg
    296268355_10160221454319662_1159710707734696534_n.jpg
    133.8 KB · Views: 36
I've got an '87 Toyota pickup crawler project, it's around 75% done. Started life as a 2wd, now has SAS. J10 dana 44 front, tacoma 8.4 rear, ruf front springs, ford f150 rear springs. 22r converted to propane and has a turbo, runs, single transfer case. Basically needs a few big things finished like gears and spools installed (I have 5.38/5.29 gears and mini spools for the axles, and master install kits), then there is a lot of little things needed like a small amount of welds finished, some wiring for the propane lock off, seats mounted, exhaust finished, just a lot of misc little stuff. Truck is sitting on new 42" Irok's but do not come with it for the asking price (could negotiate a price on them but of course it will be a good amount being brand new). I'm asking $2,000 firm but will trade for a chevy kingpin 60 front and 14 bolt rear axle plus a little cash from the buyer. If interested pm me I've got some pics on my phone I can send when I get a chance. Someone please take this thing off my hands before I tear it apart to put the axles underneath my 4runner and have even more unneeded work and toyota parts just sitting around.
 
toyotacrawler31 said:
I've got an '87 Toyota pickup crawler project, it's around 75% done. Started life as a 2wd, now has SAS. J10 dana 44 front, tacoma 8.4 rear, ruf front springs, ford f150 rear springs. 22r converted to propane and has a turbo, runs, single transfer case. Basically needs a few big things finished like gears and spools installed (I have 5.38/5.29 gears and mini spools for the axles, and master install kits), then there is a lot of little things needed like a small amount of welds finished, some wiring for the propane lock off, seats mounted, exhaust finished, just a lot of misc little stuff. Truck is sitting on new 42" Irok's but do not come with it for the asking price (could negotiate a price on them but of course it will be a good amount being brand new). I'm asking $2,000 firm but will trade for a chevy kingpin 60 front and 14 bolt rear axle plus a little cash from the buyer. If interested pm me I've got some pics on my phone I can send when I get a chance. Someone please take this thing off my hands before I tear it apart to put the axles underneath my 4runner and have even more unneeded work and toyota parts just sitting around.
Click to expand...
Cool man post up some pics :beer:
 
Pless said:
I would let it go for 1200. That is an old picture, it makes it look better than it is. I'm at the beach this week, I can get better pictures this weekend if you want.

The title is in the PO,s name, my understanding is he passed away. I haven't taken the time to pursue getting the title changed over, so I'm not sure what would be involved with that.

View attachment 419642
Click to expand...
Oh dear, I shouldn't have googled how far away you are....

Dag but that'd be a fun build.
 
Back
Top