replace 1 spring pack?

RatLabGuy

RatLabGuy

You look like a monkey and smell like one too
Joined
May 18, 2005
Location
Churchville, MD
i have 1 spring pack that has a bend in the main long spring (kinked from a shackle inversion), prob should be replaced (dosn't spring as well as the other side anymore).

They're fairly used Pro Comp 33311s.
Can I get away w/ just replacing that one side? I'm sure the new pack will be alot more stiff than the other side, at least until broken in... but will it be really goofy or settle to matchw/o too much time?

i love these springs, they're flexy as all hell.
 
I've got the same problem on my Samurai right now. I bent the main left front leaf at URE in mid Dec. I am going to just take the pack apart and straighten it in my 20 ton HF press. I really fubared my right rear spring pack several months ago into an S shape. It was so bad that the rig was sagging in the right rear corner. I took it apart and rearched/straightened all the leafs in my press and it has bene working great since.
 
Back
Top