Blaze
The Jeeper Reaper
- Joined
- Aug 9, 2005
- Location
- Wake Forest, NC
Just cleaning out my pile of spare parts. Trying to collect some money for my son and I to expand our business we've been working on. Need space and some cash to make it happen. I'll add more as we start going through the attic. I have so much crap. 
Great condition factory T56 shifter from f-body. It's just a standard stock one. Worked fine but we swapped to a Tick shifter. $30
Almost brand new distributor for a 2.5L iron duke - $25
Pulled these out of an LT1 but they'll fit any small block that has raised bosses in the valley. You can drill and tap these bosses to accept the spider. Complete set, I have two sets. $30 each
I have two sets of F-body LT1 valve covers. These have the little notch for the alternator with the LT1 accessory brackets. Good shape, no damage. $25 each set
Pulled this off of an LT1 that I parted out. It is in good shape but very dirty. Needs cleaning, paint or powdercoat. No fuel rail but I do have a throttle body. $40
Great condition t-tops out of a 1995 Camaro Z28. They have no cracks or damage and were working perfectly. They fit 4th gen f-bodies. $80
Pulled these off of my 2016 Expedition. They had 190k miles but worked good. I had to replace my cracked exhaust manifolds so I installed new turbos while I was in there. Probably couldn't hurt to rebuild them, but they were working ok as it was. $250
Vintage 15x7 Slot Mag wheels - pair of 15x7 mags, 5x5 bolt pattern. Good shape, just need cleaning up. $120
Brand new set of Hedman mid-length headers for a 3rd gen F-body. Part number 68740. We bought these to use on a project, but ended up not using them so no need for them now. They were about $270 new. $150
Great condition factory T56 shifter from f-body. It's just a standard stock one. Worked fine but we swapped to a Tick shifter. $30
Almost brand new distributor for a 2.5L iron duke - $25
Pulled these out of an LT1 but they'll fit any small block that has raised bosses in the valley. You can drill and tap these bosses to accept the spider. Complete set, I have two sets. $30 each
I have two sets of F-body LT1 valve covers. These have the little notch for the alternator with the LT1 accessory brackets. Good shape, no damage. $25 each set
Pulled this off of an LT1 that I parted out. It is in good shape but very dirty. Needs cleaning, paint or powdercoat. No fuel rail but I do have a throttle body. $40
Great condition t-tops out of a 1995 Camaro Z28. They have no cracks or damage and were working perfectly. They fit 4th gen f-bodies. $80
Pulled these off of my 2016 Expedition. They had 190k miles but worked good. I had to replace my cracked exhaust manifolds so I installed new turbos while I was in there. Probably couldn't hurt to rebuild them, but they were working ok as it was. $250
Vintage 15x7 Slot Mag wheels - pair of 15x7 mags, 5x5 bolt pattern. Good shape, just need cleaning up. $120
Brand new set of Hedman mid-length headers for a 3rd gen F-body. Part number 68740. We bought these to use on a project, but ended up not using them so no need for them now. They were about $270 new. $150