Suck Down Winch Advice

[burrellsjeep]

Will this work for a suck down winch on a TJ?

Specs:
2000-lb. pulling capacity (single line)
12V permanent magnet DC motor
NGWN type planetary geartrain
153:1 gear ratio
Spline joint clutch
4.6-ft. handheld remote control
Includes 50 feet of 5/32in. cable with hook and 6-ft. battery cables

click for link

 

[Ron]

Im not going to say it wouldnt work..but for the price diff why not a warn worx?

 

[Rox&Mud]

I have a 3000 on my TJ and it does the job well. I would get a winch with a load holding brake. The first winch I used didn't have one and I had to continually tap the button to keep it sucked down.

 

[zubz]

I have a 3000 on my TJ and it does the job well. I would get a winch with a load holding brake. The first winch I used didn't have one and I had to continually tap the button to keep it sucked down.

Definitely get one with a load holding brake. The one you listed will not work as well as you will probably want it to.

The Warn 3000 works well for this.

 

[burrellsjeep]

Im not going to say it wouldnt work..but for the price diff why not a warn worx?

The Warn Works would be the way to go, But I thought I would ask seeing the $60 price difference, and my budget is tight, But I don't want to waste the money if it won't work

I have heard about the locking brake, the warn does have one.

The northern looked ok for the price $50, Like I said not worth it if is junk

And I guess it is possible to wire it to a mounted momentary toggle switch, the warn that is

 

[Black Bear]

I use a 1700 warn on the back of my toyota works fine for me, although i am running air socks not coils.