[ATTACH=full]274672[/ATTACH]
Not to horribly bad for a first time. I thought you were gonna stick it. But since your using flux core, come out of the root more and let the puddle flow out. blend the material of the unground side help fill the open root and the bevel side. uphill welds will need to be wider then a flat so the weld can "stack"
here is a vertical I did on a track loader last saturday. Was a crack in 3/8" formed plate. I ground the crack completely through then welded. Could not get a drill in to end the crack.
[ATTACH=full]274673[/ATTACH]
