Once I got the Jeep running I quickly discovered that my original pipe dream of using the stock radiator to cool this engine was not going to happen. To remedy the problem I ordered an aluminum circle track radiator from Speedway motors and made it fit in the Jeep. I had to cut the stock radiator core support out and fabricated my own. I used a Taurus fan and I made a fan shroud. This setup has been keeping the truck cool with no issues so far.
[ATTACH=full]206616[/ATTACH]
[ATTACH=full]206617[/ATTACH]
[ATTACH=full]206618[/ATTACH]
[ATTACH=full]206619[/ATTACH]
[ATTACH=full]206620[/ATTACH]
