Third gen Toyota tube doors

Discussion in 'Parts For Sale' started by jptyoder, Oct 2, 2018.

  1. jptyoder

    jptyoder Well-Known Member

    Joined:
    Jun 5, 2012
    Location:
    Bethlehem NC
    a few Toyota builder parts that I have decided not to use.

    84-85 solid front axle. Long full gusset on the bottom from factory. Complete hub to hub minus hardware for the steering arms. Diff is in it and has not been removed- unsure of gearing but willing to bet on 4.10. SOLD

    Also have a kit includes a top gussets caps to weld on steering stops for strength, and plates with tapered screws to install on bottom felts for knuckles so bolt heads can’t be damaged on trails. $50 obo

    4.10 4cyl diff with spartan locker. Used very little maybe 5-6 trail rides was in the front axle of another rig. Fully set up ready to drop in. SOLD

    Two sets of rear springs intended to make a RUF pack. Fair condition, bushings are worn. SOLD

    Set of tube doors for third gen Toyota pickup, 89-95. Look to be trail gear in great condition. $200 obo

    All prices are open to offers and can be negotiated for buying the whole lot as well. Texting is the best way to reach me 8286395905
     

    Attached Files:

    Last edited: Dec 13, 2018
  2. jptyoder

    jptyoder Well-Known Member

    Joined:
    Jun 5, 2012
    Location:
    Bethlehem NC
    Bump to the top! Motivated to sell. Pending funds on 4.10 with locker
     
  3. RatLabGuy

    RatLabGuy You look like a monkey and smell like one too

    Joined:
    May 18, 2005
    Location:
    Churchville, MD
    Are you willing to ship the tube doors? 21028.
     
  4. jptyoder

    jptyoder Well-Known Member

    Joined:
    Jun 5, 2012
    Location:
    Bethlehem NC
    Don’t have a paypal etc to accept payment to make that possible. 4.10 with spartan sold. Andddd ttt
     
  5. jptyoder

    jptyoder Well-Known Member

    Joined:
    Jun 5, 2012
    Location:
    Bethlehem NC
    Bump taking offers!!!
     
  6. dark knight

    dark knight Active Member

    Joined:
    Sep 24, 2009
    Location:
    Mid SC
    Interested in the axle and rear springs. I’m working a crazy schedule until about Thanksgiving, maybe I’ll be able to pick it up then if you still have it.
     
  7. jptyoder

    jptyoder Well-Known Member

    Joined:
    Jun 5, 2012
    Location:
    Bethlehem NC
    dark knight likes this.
  8. immi.jfreeman

    immi.jfreeman Active Member

    Joined:
    Jun 7, 2016
    Location:
    South Carolina
    Do you ever get down near Spartanburg? I would like to have the rear springs. I'm gathering parts for a ruf swap on my 1stgen

    Sent from my XT1650 using Tapatalk
     
  9. jptyoder

    jptyoder Well-Known Member

    Joined:
    Jun 5, 2012
    Location:
    Bethlehem NC
  10. jptyoder

    jptyoder Well-Known Member

    Joined:
    Jun 5, 2012
    Location:
    Bethlehem NC
  11. jptyoder

    jptyoder Well-Known Member

    Joined:
    Jun 5, 2012
    Location:
    Bethlehem NC
    Still trying to part with this stuff
     
  12. jptyoder

    jptyoder Well-Known Member

    Joined:
    Jun 5, 2012
    Location:
    Bethlehem NC
  13. jptyoder

    jptyoder Well-Known Member

    Joined:
    Jun 5, 2012
    Location:
    Bethlehem NC
    To the top! All above still available except diff with locker.
    Also have v6 open 4.10 diff, ifs steering box etc
     
  14. ProbablyBroke

    ProbablyBroke does not torque to spec

    Joined:
    Nov 7, 2012
    Location:
    Charlotte
    Price on v6 open diff?
     
  15. jptyoder

    jptyoder Well-Known Member

    Joined:
    Jun 5, 2012
    Location:
    Bethlehem NC
  16. jptyoder

    jptyoder Well-Known Member

    Joined:
    Jun 5, 2012
    Location:
    Bethlehem NC
    @ProbablyBroke let me know if you’re interested. @dark knight axke and springs still available if you’re still interested.

    Text is best 8286395905
     
  17. ProbablyBroke

    ProbablyBroke does not torque to spec

    Joined:
    Nov 7, 2012
    Location:
    Charlotte
    I would just want it as a spare. Not looking to spend that much, but I'll keep it in mind.
     
  18. dark knight

    dark knight Active Member

    Joined:
    Sep 24, 2009
    Location:
    Mid SC
    Still interested in the axle and rear springs but have no idea when I’m going to be able to make it up that way. I’m hoping for some time off soon.
     
  19. jptyoder

    jptyoder Well-Known Member

    Joined:
    Jun 5, 2012
    Location:
    Bethlehem NC
    Bump up top needs to go
     
  20. jptyoder

    jptyoder Well-Known Member

    Joined:
    Jun 5, 2012
    Location:
    Bethlehem NC
    Updated list. Still have tube doors, 4.10 open v6 diff and gusset/plates for a front axle.
     
  21. jptyoder

    jptyoder Well-Known Member

    Joined:
    Jun 5, 2012
    Location:
    Bethlehem NC
    Bump tube doors would make a good Christmas gift!
     

Share This Page