tire rub

wrangler00

wrangler00

Active Member
Joined
Jun 16, 2009
Location
morganton
my buddy has a 2000 jeep wrangler stock and i sold him a set of 31.11.15 tsls and factory rims and his rub on his track bar and i think the control arm on the other side so what i was wondering is how much of a wheel spacer he would need to keep from rubbing or is he just shit out of luck and needs to go get new wheels
 
wrangler00 said:
my buddy has a 2000 jeep wrangler stock and i sold him a set of 31.11.15 tsls and factory rims and his rub on his track bar and i think the control arm on the other side so what i was wondering is how much of a wheel spacer he would need to keep from rubbing or is he just shit out of luck and needs to go get new wheels
Click to expand...
About 3.75 will do.
 
I put 1 1/4" wheel spacers on my stock (wheels) grizzly's when I went to 33X10.50's....so if he want to stick with the stock wheel, that would probably work.

BTW....most of the spacers you find (set of 4) will cost about as much as a set of soft 8's from summit racing.....

chris
 
wrangler00 said:
where could i get 3.75 in wheel spacers
Click to expand...
Quadratec, 4 Wheel Drive Hardware, 4 Wheel Parts Wholesalers. Lots of places sell them. The 3.75" reference was for the backspacing on aftermarket wheels. You'll probably only need 2" spacers.
 
Back
Top