Toyota 20r...no spark

StretchASU

Well-Known Member
Joined
Oct 17, 2006
Location
Creedmoor, NC/Claudville, VA
Started having a issue not getting spark after the truck sat and had been worked on for a bit. We wired in a push button start because the stock tumbler was fubar'd. Its wired in according to the diagram and it will turn over, but no spark. The grounds are good, its got a new cap, rotor, plugs, wires and coil as well. Im running out of ideas...
 
It's your ignitor. Mine crapped out on me a while back. It's a silver or black box right near the coil.
 
That would mean I just had 2 dead igniters. I replaced the one I had with one from JBM715. My luck is shitty but that would really suck.

Ill start by making new connections at the battery where the green and red wires come out of the loom. They have very little wire coming into the connector.
 
Back
Top