transfer case dilema

[mudjunkie]

i have a 91 s10 blazer that i would like to put 1 tons under but wrong drop on transfer case . i have a np208 out of 88 k5 blazer will this case bolt up to the 700r4 in the s10 ?

 

[rockmafia]

i have a 91 s10 blazer that i would like to put 1 tons under but wrong drop on transfer case . i have a np208 out of 88 k5 blazer will this case bolt up to the 700r4 in the s10 ?

As long as they were both mounted to a 700r4, then yes. You may have to massage the sheetmetal a little.

 

[mudjunkie]

the truck has 3 inch body lift so hopefully it should fit

 

[Ron]

as long as the np208 came out of a normal blazer in 88 it will be a 700r spline input.... if it was a military m1008 or similar it will be off a th400 and may not fit.