Tube Shock Towers!

[Dan Fredrickson]

Here is a pair of 1.5"x.120 wall DOM shock hoops. These are not the typical both sides even type everyone else makes because often your mounting surface and where you need to mount them simply have to be different. These make it easy to mount them tilted forward or rearward and have enough tube. If you are one of the lucky few that can mount them straight up and down just cut off the extra tube!

They come with two pair of our curved shock tabs so you can fine tune the height adjustment by the position of the tabs.

Shock Hoop 1.5" - RuffStuff Specialties​

 

[Dan Fredrickson]

Versatile and adaptable to just about any rig!

 

[Dan Fredrickson]

Strong and simple, no need to over-complicate here!

 

[Dan Fredrickson]

Can't beat this quality and price!

 

[Dan Fredrickson]

These sure do keep our tube bender busy!

 

[Dan Fredrickson]

Easy to install, and looks good all finished up!

 

[Dan Fredrickson]

The right size to be able to fit in just about any rig and pack up to ~16" + coil-overs or Airshocks.

 

[Dan Fredrickson]

A lot of rigs these can be made to work with!

 

[Dan Fredrickson]

A simple design, but strong and functional.

 

[Dan Fredrickson]

Easily manageable on so many unique setups.

 

[Dan Fredrickson]

Weld it to the frame, gusset it up a little, and carry on!

 

[Dan Fredrickson]

Easily fits in rigs from big to small, Samurais to K5s

 

[Dan Fredrickson]

Lightweight, and plenty strong, you can't go wrong!

 

[Dan Fredrickson]

Easy to install, and you can crawl over more than mall.

 

[Dan Fredrickson]

Time to get it installed!

 

[Dan Fredrickson]

Easy to trim and make fit into anything you've got!

 

[Dan Fredrickson]

Works great with coil-overs, air shocks, or just plain old shocks!

 

[Dan Fredrickson]

A great way to get it done!