U-joints with full circle clips

Webbinator

Webbinator

Well-Known Member
Joined
Mar 20, 2005
Location
York, SC
Any trick to installing these. I just acquired dana 44 chromo shafts and longfield joints. I have never used any joints with the bushing caps and full circle clips. Don't want to mung up high dollar stuff because of inexperience with 'em. Thanks.
 
just make sure you put leave the clip on the joint when istalling the joints on the axle. Obviously you cant stretch the clip and put it on after the joint has been installed in the shaft. Going to full circle clips is the best thing you will ever do.
 
farmboy said:
just make sure you put leave the clip on the joint when istalling the joints on the axle. Obviously you cant stretch the clip and put it on after the joint has been installed in the shaft. Going to full circle clips is the best thing you will ever do.
Click to expand...


:edit: Welding the caps in is the best thing you'll ever do. :flipoff2:


Most people just don't want to grind up their shiny new axles/joints.
 
Back
Top