Water Temp Sending Unit

ricesyj

New Member
Joined
Jul 6, 2005
Location
Charlotte
95 YJ 4.0 Manual
I am replacing the gauges with aftermarket and the new gauge came with a new water temp sending unit. I thought I found the old water temp sending unit in the very front center of the engine right behind the fan. However the two wires coming out of this piece do not match the colors in the dash where the other gauges were hooked up. Also the new sending unit has a place to just hook one wire the stock part has two wires so I am pretty sure what I am looking at is not right. Any help would be greatly appreciated. The gauge is an Autometer Phantom Temp Gauge Electrical.

Thanks,
Troy
 
your 4.0 has two temp sending units. one at the front is for the computer. one at the back of intake is for the guages. the one for the guages is single wire. The one on the waterneck is a 2 wire.
 
Back
Top