where to find these?

sharksanddanger

sharksanddanger

Well-Known Member
Joined
Apr 18, 2005
Location
Reidsville
I'm trying to get my girlfriend's Xterra back together and I was pretty sure I bought these somewhere a couple years ago, at a parts store or something but can't come up with anything now and I really need them before this weekend.

Looks like this(this one is apparently for a d60)
awww.4wdfactory.com_store_product_images_a_d60_slingers__29295.jpg


Here is what it looks like installed on the d44 shaft. You can see the piece towards the yoke on the stub shaft, you just tap the piece on with a hammer, it's kind of a tight fit and acts a metal backing for the spindle seals.

dana44hub11.jpg
 
I made one in a bind one time, but for the better news PARTS MIKE had em in stock for Dana stuff including my Dana 44. IS that under an Exterra? Swapped in?
 
WARRIORWELDING said:
I made one in a bind one time, but for the better news PARTS MIKE had em in stock for Dana stuff including my Dana 44. IS that under an Exterra? Swapped in?
Click to expand...

Hm, I really need them before this weekend so I can put it all back together. Yeah, it's under(kind of) my girlfriend's Xterra, I swapped it in but still have to finish up some things. Was a buddies truck and I put the axle under there with leafs, since then we acquired the truck and I'm doing a 3 link and putting coilovers on there. Check the build ups, there is a thread in there if you want to see some progress, I need to update it.
 
Richard i think i have a spare shaft with one on it. Ill ck in the morning if i do i will send it with kevin to work thursday.
 
Parts Mike stocked them and knew right off what they were when I discribed them. Try to ship em next day. Nobody round here could even look them up for me. I can't remember the exact part name he gave me. I thought of him late Friday and wanted to wheel Saturday. So I made one in a bind with a short piece of tube (very thin wall) and a piece of 20 ga. sheet metal. Redneck but it served the purpose.
 
WARRIORWELDING said:
Parts Mike stocked them and knew right off what they were when I discribed them. Try to ship em next day. Nobody round here could even look them up for me. I can't remember the exact part name he gave me. I thought of him late Friday and wanted to wheel Saturday. So I made one in a bind with a short piece of tube (very thin wall) and a piece of 20 ga. sheet metal. Redneck but it served the purpose.
Click to expand...


I just found it. It's called a Dana 44 stub shaft "slinger". Dana/Spicer part# 36364. I'll try to call a couple parts stores tomorrow and see if they can cross reference or get it.
 
Where did you get the part number? I tried the Dana sight and some parts stores but got fustrated and called P-Mike. Fleet-Pride carries alot of Dana stuff but useually can't look up:poop:
 
WARRIORWELDING said:
Where did you get the part number? I tried the Dana sight and some parts stores but got fustrated and called P-Mike. Fleet-Pride carries alot of Dana stuff but useually can't look up:poop:
Click to expand...

It was on the parts mike site, it was DAN36364, I just separated it into Dana 36364 and it popped up on ebay and several other places. Was just told that I could get them at Napa, I'll call them tomorrow as there is a Napa warehouse there in High Point/Greensboro, they should have it.
 
Back
Top