Critique my dashboard

[1-tonmudder]

Setting up my phone app to monitor my 06 F-350 and needing some input on what to add to the app dash board.I already have.
Engine coolant temp
Engine oil temp
Boost
Intake manifold absolute pressure
Fuel rail pressure
Voltage.
What did I miss??

@Caver Dave maybe??

 

[Rnuovrcj5]

Intake air temp and accelerator pedal position are 2 I tend to have on my Edge screen

 

[Chris_Keziah]

Coolant temp
Oil temp
Boost
Hp oil rail pressure
Intake air temp

These are what I ran on my 7.3, Map and boost pressure will pretty much be the same.

 

[CasterTroy]

What did I miss??

EGT

 

[Stuntman Autoworks]

EGT, Boost, trans temp, fuel rail pressure and engine oil temp is all I worried about.

 

[R Q]

You want an @Caverdave app?

 

[Caver Dave]

Setting up my phone app to monitor my 06 F-350 and needing some input on what to add to the app dash board.I already have.
Engine coolant temp
Engine oil temp
Boost
Intake manifold absolute pressure
Fuel rail pressure
Voltage.
What did I miss??

There are a couple of sites that list the FORD/Powerstroke specific PIDs available for ODB2 monitoring... not sure about the Manifold absolute, but 99.999% sure there's no means to monitor fuel pressure via ODB2

https://www.powerstroke.org/forum/general-6-0l-discussion/259257-write-up-monitoring-6-0l-psd.html

I ran EOT, ECT, "Delta" (between the first 2), boost & VGT, Trans Temp, HPOP, EBP (just monitoring to see how much difference is made with 4" turbo back in the future), and Voltage...