'01 Dodge Ram 1500 Help

BigBody79

BigBody79

Well-Known Member
Joined
Mar 30, 2005
Location
Lumberton
I'm not a dodge guy and can't seem to help my buddy out. However, I know you guys will be quick with the answer.

The part that holds the bearing for the stub shaft on the knuckle. It bolts on to the knuckle from behind. It maybe the spindle the truck doesn't have locking hubs so I don't know. Not anything that I am familar with. The bearing let go and then this part tore up. I'm trying to find the name of the part or a diagram of the knuckle so I can start tracking one down.


TIA
 
unit bearing??? the whole thing unbolts (probably three bolts from the backside) and is replaced.
 
They are proud of those trash ass things too.....My buddy paid $280 per side on his 3500
 
I'd swap in a king pin 60 before I bought those things
 
Hub bearing. They are known to go bad, espesially with larger tires. Napa used to carry them with a lifetime warranty... they may have changed it to a year now.

Try not to drive too much with the bearing going bad. If it fails it will mess up your day.
 
Back
Top