2.5 to 4.0 in a YJ engine mounts

[BIGWOODY]

I need to cut the mounts off the frame and move them forward a little over 4" this much I know. What I'd like to do is instead of cutting mine off (because the skid plate ties into their current location) get another set and weld them on in front of the mounts that are currently there. But after doing some research and finding out that Jeep no longer carries these, where can I get some other than hitting up junk yard after junk yard looking for a YJ to cut them off of. Anyone got ideas or know of a YJ being parted?

 

[Jody Treadway]

We used to accomplish this with some tube and leaf spring bushings. Typical bushing in a DOM sleeve, welded to the frame.
Here's a pic on a YJ frame that was a 2.5 that we installed a 4.0 in. You can see it on the driver's side.

 

[hoop]

I think Your in luck! I am cutting the mounts out of my 1994 yj in the next couple of days. It had a 2.5 so if you want the mounts I will cut evr so carefully for you. Happy to ship on your dime. Just pm me and let me know you want them and give me an address..