83yota4x4
Toyota Junky
- Joined
- Nov 11, 2008
- Location
- Forest City, NC
I have a built 20R
.020 over on pistons
.020 taken off crank
.010 taken off head
.010 or .050 taken of block
Weber 38/38
header
I am having a problem with my top rad. hose collapsing under throttle.
On the intake I plugged off the hole that lets water flow under the intake and into the stock 20R carb choke. I also didn't know what to do with the passenger side water port on the timing cover behind the water pump so i blocked it off.
is that suppose to be open and run over to somewhere on the drivers side?
.020 over on pistons
.020 taken off crank
.010 taken off head
.010 or .050 taken of block
Weber 38/38
header
I am having a problem with my top rad. hose collapsing under throttle.
On the intake I plugged off the hole that lets water flow under the intake and into the stock 20R carb choke. I also didn't know what to do with the passenger side water port on the timing cover behind the water pump so i blocked it off.
is that suppose to be open and run over to somewhere on the drivers side?