3 link question

[pcole0920]

What's the best material to make the top link out of? Should I go ahead and use 1.25" heims? And what size Dom?

 

[StrokedWJ]

I used 2" .25 wall tube, a 1.25" Johnny joint at the unibody mount and replaced the D30 press in bushing with a press in johnny joint as well.

 

[pcole0920]

Any pic of the 3rd link mount at the unibody?

 

[Hurley]

not to divert the thread, but Spence & I tied his 3rd link back to the transmission cross member.