33s on a cherokee with a 3" lift

seems like you know what your in for if you do... i had a 4.5 inch lift with 33x13.50s and not much back spacing, they rubbed baaaaaad. you cant hardly turn let alone wheel. if you do go ahead and put them on their you will probably change ur mind about hacking the fenders pretty quick
 
It will work I've seen me do it, taking the flares off will help but it will throw up a lot of road debris & will rub unless u do more trimming
 
ive used extra stock coil isolators for front lift. thay are 3/4 (.75) for each extra one. can usually get them at pull a part when someone pulls a front axle. for the rear, pep boys sells shackles for lowering chevys. they can give you 3" of lift.
as for a SYE, have you looked into a hac n tap? theres a certain year corvette yoke that works.

also to add. if you do a SYE a cheap thing (for automatics) is to use a front drive shaft in the rear
 
Ive heard of hac n taps but dont think itd be a good one for me, I was thinking tcase drop, and 1.5 or 2 " shackles and spacers
 
another thing. if(when) it starts rubbing the metal fenders it will cut the poo out of your tires. its not worth it... just cut the metal or put the right amount of lift.... at about 4-5 inches and a 12.50 even better with a 10.50 and proper backspacing and bumpstoppig you could PROBABLY get away with just having to shave the flare some for street driving
 
Back
Top